Frame Mounted TJ Skidz with Diamond Plate Step - TSP
Frame Mounted YJ/TJ Skidz with Diamond Plate Step and Body Lift Upgrade - TBP

Same as the Rock Skidz but with a welded diamond plate step area to make it even easier to get in and out of your rig.

These are designed to save your Wrangler's rockers from showing all the fun they've seen and provide easier access in and out with a step. If used as a step, we suggest putting down some type of traction tape first.

Skidz are made of extra strong square 2" x 2" steel tubing that is 3/16" thick. Tapered front and rear to slide over and not hang up on the rough stuff. With 2" steel DOM tubing for pivoting and sliding over the rocks without getting hung up. Outer tube sticks out aproximately 4.5" to protect your sheetmetal. This will vary slightly between Sahara, Willy's and Rubicon models.

Our unique mounting plate actually "sandwiches" the frame with dual 3/8" thick mounting plates producing a "no drilling required" easy installation, to induce rust or possibly weaken the frame. Can you believe some of our competitors would have you drill over 20 holes in your frame and body to install their bars? Our 3/8" thick mounting plates distribute the load of impacts or jacking vertically across the frame, and not through a drilled in frame bolt, for serious strength and less chance of damage.

Includes passenger and drivers side Skidz and Grade 8 hardware.

YJ series (87'-95') require a 1" min. body lift or contact us for a custom buildt set for non-body lifted YJ versions at the same cost.

May not work or may require modifications for some aftermarket accesories or suspensions.

*Includes a flat welded on step, please install some traction tape if using this as a step.